dmesg - same specs but cpu swapped to 2600x
Linux version 4.16.8-1-ARCH (builduser@heftig-7043) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Wed May 9 11:25:02 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000dac4ffff] usable
BIOS-e820: [mem 0x00000000dac50000-0x00000000dc13bfff] reserved
BIOS-e820: [mem 0x00000000dc13c000-0x00000000dc230fff] usable
BIOS-e820: [mem 0x00000000dc231000-0x00000000dc607fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc608000-0x00000000dcfd6fff] reserved
BIOS-e820: [mem 0x00000000dcfd7000-0x00000000dd069fff] type 20
BIOS-e820: [mem 0x00000000dd06a000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdc231000 ACPI=0xdc231000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd96b2298 MEMATTR=0xd94b0418
SMBIOS 3.0.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Gaming-ITX/ac, BIOS P4.60 04/19/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d96b2298 to 0x00000000d96b22d0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x3cb655000, 0x3cb655fff] PGTABLE
BRK [0x3cb656000, 0x3cb656fff] PGTABLE
BRK [0x3cb657000, 0x3cb657fff] PGTABLE
BRK [0x3cb658000, 0x3cb658fff] PGTABLE
BRK [0x3cb659000, 0x3cb659fff] PGTABLE
BRK [0x3cb65a000, 0x3cb65afff] PGTABLE
BRK [0x3cb65b000, 0x3cb65bfff] PGTABLE
BRK [0x3cb65c000, 0x3cb65cfff] PGTABLE
BRK [0x3cb65d000, 0x3cb65dfff] PGTABLE
BRK [0x3cb65e000, 0x3cb65efff] PGTABLE
BRK [0x3cb65f000, 0x3cb65ffff] PGTABLE
BRK [0x3cb660000, 0x3cb660fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x371c7000-0x378dafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DC231000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC2310A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC2378D0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
ACPI: DSDT 0x00000000DC2311F0 0066DD (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC5F0E00 000040
ACPI: APIC 0x00000000DC2379E8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC237AC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC237B10 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC237BB0 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DC240848 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DC2422A0 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DC242E70 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DC242EA0 002CCA (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DC245B70 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000DC245BB0 000200 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DC245DB0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DC245DE8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DC245E10 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DC245E58 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DC245E90 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DC245F60 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DC246058 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DC247AA0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000dac4ffff]
node 0: [mem 0x00000000dc13c000-0x00000000dc230fff]
node 0: [mem 0x00000000dd06a000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4177104
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14055 pages used for memmap
DMA32 zone: 899505 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xdac50000-0xdc13bfff]
PM: Registered nosave memory: [mem 0xdc231000-0xdc607fff]
PM: Registered nosave memory: [mem 0xdc608000-0xdcfd6fff]
PM: Registered nosave memory: [mem 0xdcfd7000-0xdd069fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 4111808
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16291452K/16708416K available (10252K kernel code, 1262K rwdata, 3404K rodata, 1460K init, 640K bss, 416964K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 31738 entries in 124 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI: 7 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3592.762 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33c99dd8018, max_idle_ns: 440795387494 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7188.92 BogoMIPS (lpj=11975873)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD Ryzen 5 2600X Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 12 processors activated (86260.04 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdc231000-0xdc607fff] (4026368 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:21:39, date: 05/15/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-25]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:00.0: PME# supported from D3hot D3cold
pci 0000:1d:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:01.0: PME# supported from D3hot D3cold
pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:04.0: PME# supported from D3hot D3cold
pci 0000:1d:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:05.0: PME# supported from D3hot D3cold
pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:06.0: PME# supported from D3hot D3cold
pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:07.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 1d-25]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:01.0: PCI bridge to [bus 1f]
pci 0000:1d:04.0: PCI bridge to [bus 22]
pci 0000:1d:05.0: PCI bridge to [bus 23]
pci 0000:24:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:24:00.0: reg 0x10: [mem 0xf7600000-0xf7601fff 64bit]
pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:06.0: PCI bridge to [bus 24]
pci 0000:1d:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:25:00.0: [8086:1539] type 00 class 0x020000
pci 0000:25:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
pci 0000:25:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:25:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:07.0: PCI bridge to [bus 25]
pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
pci 0000:1d:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:26:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:26:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:26:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:26:00.0: BAR 3: assigned to efifb
pci 0000:26:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:03.1: PCI bridge to [bus 26]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
pci 0000:27:00.0: enabling Extended Tags
pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
pci 0000:27:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
pci 0000:27:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
pci 0000:27:00.2: enabling Extended Tags
pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
pci 0000:27:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:27:00.3: enabling Extended Tags
pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 27]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
pci 0000:28:00.0: enabling Extended Tags
pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
pci 0000:28:00.2: reg 0x24: [mem 0xf7808000-0xf7808fff]
pci 0000:28:00.2: enabling Extended Tags
pci 0000:28:00.2: PME# supported from D3hot D3cold
pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
pci 0000:28:00.3: reg 0x10: [mem 0xf7800000-0xf7807fff]
pci 0000:28:00.3: enabling Extended Tags
pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 28]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:26:00.0: vgaarb: setting as boot VGA device
pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:26:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdac50000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc231000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0280-0x028f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x02b0-0x02bf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:01.0: PCI bridge to [bus 1f]
pci 0000:1d:04.0: PCI bridge to [bus 22]
pci 0000:1d:05.0: PCI bridge to [bus 23]
pci 0000:1d:06.0: PCI bridge to [bus 24]
pci 0000:1d:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:1d:07.0: PCI bridge to [bus 25]
pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
pci 0000:1d:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:03:00.2: PCI bridge to [bus 1d-25]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-25]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 26]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 27]
pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:00:08.1: PCI bridge to [bus 28]
pci 0000:00:08.1: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf77fffff]
pci_bus 0000:1d: resource 0 [io 0xf000-0xffff]
pci_bus 0000:1d: resource 1 [mem 0xf7500000-0xf76fffff]
pci_bus 0000:24: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:25: resource 0 [io 0xf000-0xffff]
pci_bus 0000:25: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf74fffff]
pci_bus 0000:28: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7248K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:03:00.1 to group 12
iommu: Adding device 0000:03:00.2 to group 12
iommu: Adding device 0000:1d:00.0 to group 12
iommu: Adding device 0000:1d:01.0 to group 12
iommu: Adding device 0000:1d:04.0 to group 12
iommu: Adding device 0000:1d:05.0 to group 12
iommu: Adding device 0000:1d:06.0 to group 12
iommu: Adding device 0000:1d:07.0 to group 12
iommu: Adding device 0000:24:00.0 to group 12
iommu: Adding device 0000:25:00.0 to group 12
iommu: Adding device 0000:26:00.0 to group 13
iommu: Adding device 0000:26:00.1 to group 13
iommu: Adding device 0000:27:00.0 to group 14
iommu: Adding device 0000:27:00.2 to group 15
iommu: Adding device 0000:27:00.3 to group 16
iommu: Adding device 0000:28:00.0 to group 17
iommu: Adding device 0000:28:00.2 to group 18
iommu: Adding device 0000:28:00.3 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.3: AER enabled with IRQ 26
pcieport 0000:00:03.1: AER enabled with IRQ 27
pcieport 0000:00:07.1: AER enabled with IRQ 28
pcieport 0000:00:08.1: AER enabled with IRQ 30
pcieport 0000:00:01.3: Signaling PME with IRQ 26
pcieport 0000:00:03.1: Signaling PME with IRQ 27
pcieport 0000:00:07.1: Signaling PME with IRQ 28
pcieport 0000:00:08.1: Signaling PME with IRQ 30
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08008204
microcode: CPU1: patch_level=0x08008204
microcode: CPU2: patch_level=0x08008204
microcode: CPU3: patch_level=0x08008204
microcode: CPU4: patch_level=0x08008204
microcode: CPU5: patch_level=0x08008204
microcode: CPU6: patch_level=0x08008204
microcode: CPU7: patch_level=0x08008204
microcode: CPU8: patch_level=0x08008204
microcode: CPU9: patch_level=0x08008204
microcode: CPU10: patch_level=0x08008204
microcode: CPU11: patch_level=0x08008204
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (609149671, 0)->(685036895, -75887224)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:640:388
thermal cooling_device3: hash matches
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1460K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 692K
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
ahci 0000:03:00.1: version 3.0
xhci_hcd 0000:27:00.3: xHCI Host Controller
xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
usb usb3: SerialNumber: 0000:27:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:27:00.3: xHCI Host Controller
xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
scsi host0: ahci
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
usb usb4: SerialNumber: 0000:27:00.3
hub 4-0:1.0: USB hub found
scsi host1: ahci
hub 4-0:1.0: 4 ports detected
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 51
ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 51
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 51
ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 51
ata7: DUMMY
ata8: DUMMY
ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xf7808000 port 0xf7808100 irq 61
ata9: SATA link down (SStatus 0 SControl 300)
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 1-6: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
usb 3-3: New USB device found, idVendor=0d8c, idProduct=1066
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: I'm Fulla Schiit
usb 3-3: Manufacturer: Schiit Audio
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Schiit Audio I'm Fulla Schiit as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3:1.2/0003:0D8C:1066.0001/input/input2
hid-generic 0003:0D8C:1066.0001: input,hidraw0: USB HID v1.00 Device [Schiit Audio I'm Fulla Schiit] on usb-0000:27:00.3-3/input2
usb 3-4: new full-speed USB device number 3 using xhci_hcd
usb 1-6: New USB device found, idVendor=8087, idProduct=0aa7
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-4: New USB device found, idVendor=045e, idProduct=02ea
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: Controller
usb 3-4: Manufacturer: Microsoft
usb 3-4: SerialNumber: 3032363030313239323235373037
usb 1-7: new full-speed USB device number 3 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3593.247 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb683f3f7, max_idle_ns: 440795309157 ns
clocksource: Switched to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-7: New USB device found, idVendor=0738, idProduct=1709
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: Mad Catz R.A.T.9 Wireless Mouse
usb 1-7: Manufacturer: Mad Catz
input: Mad Catz Mad Catz R.A.T.9 Wireless Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:0738:1709.0002/input/input3
saitek 0003:0738:1709.0002: input,hidraw1: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.9 Wireless Mouse] on usb-0000:03:00.0-7/input0
usb 1-10: new full-speed USB device number 4 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: ATA-10: Crucial_CT275MX300SSD1, M0CR031, max UDMA/133
ata6.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Crucial_CT275MX3 R031 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] 537234768 512-byte logical blocks: (275 GB/256 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2 sdb3 sdb4
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] supports TCG Opal
sd 5:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-10: New USB device found, idVendor=0483, idProduct=5710
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: obins anne keyboard
usb 1-10: Manufacturer: STMicroelectronics
usb 1-10: SerialNumber: STM32
input: STMicroelectronics obins anne keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:0483:5710.0003/input/input4
hid-generic 0003:0483:5710.0003: input,hidraw2: USB HID v1.10 Device [STMicroelectronics obins anne keyboard ] on usb-0000:03:00.0-10/input0
input: STMicroelectronics obins anne keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:0483:5710.0004/input/input5
systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
hid-generic 0003:0483:5710.0004: input,hidraw3: USB HID v1.10 Keyboard [STMicroelectronics obins anne keyboard ] on usb-0000:03:00.0-10/input1
input: STMicroelectronics obins anne keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.2/0003:0483:5710.0005/input/input6
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on udev Kernel Socket.
EXT4-fs (sda2): re-mounted. Opts: data=ordered
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 12 processor cores
hid-generic 0003:0483:5710.0005: input,hidraw4: USB HID v1.10 Device [STMicroelectronics obins anne keyboard ] on usb-0000:03:00.0-10/input2
vboxdrv: TSC mode is Invariant, tentative frequency 3593253152 Hz
vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
VBoxPciLinuxInit
vboxpci: IOMMU found
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
systemd-journald[326]: Received request to flush runtime journal from PID 1
acpi_cpufreq: overriding BIOS provided _PSD data
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
cryptd: max_cpu_qlen set to 1000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
sp5100-tco: probe of sp5100-tco failed with error -16
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 4194300k swap on /dev/sda3. Priority:-2 extents:1 across:4194300k SSFS
ipmi message handler version 39.2
cfg80211: Loading compiled-in X.509 certificates for regulatory database
ipmi device interface
Linux agpgart interface v0.103
mousedev: PS/2 mouse device common for all mice
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
dca service started, version 1.12.1
ccp 0000:27:00.2: enabling device (0000 -> 0002)
input: Microsoft X-Box One S pad as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-4/3-4:1.0/input/input7
usbcore: registered new interface driver xpad
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ccp 0000:27:00.2: ccp enabled
ccp 0000:27:00.2: psp initialization failed
ccp 0000:27:00.2: enabled
kvm: disabled by bios
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver btusb
iwlwifi 0000:24:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
usbcore: registered new interface driver snd-usb-audio
Bluetooth: hci0: read Intel version: 370810225019140f20
Bluetooth: hci0: Intel device is already patched. patch num: 20
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_intel 0000:26:00.1: Disabling MSI
snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:28:00.3: enabling device (0000 -> 0002)
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
nvidia 0000:26:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.24 Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24 Wed Apr 25 23:54:18 PDT 2018
[drm] [nvidia-drm] [GPU ID 0x00002600] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:26:00.0 on minor 0
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input8
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input9
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input10
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input11
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input12
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card2/input14
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
nct6775: Found NCT6792D or compatible chip at 0x2e:0x290
iwlwifi 0000:24:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
iwlwifi 0000:24:00.0: base HW address: a0:af:bd:57:f9:45
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:24:00.0 wlp36s0: renamed from wlan0
pps pps0: new PPS source ptp0
igb 0000:25:00.0: added PHC on eth0
igb 0000:25:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:25:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:4f:fd:32
igb 0000:25:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:25:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:25:00.0 enp37s0: renamed from eth0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card1/input18
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
nvidia-modeset: Allocated GPU:0 (GPU-b8648e53-d7f4-2aa2-6d71-778e9d7c531f) @ PCI:0000:26:00.0
8021q: 802.1Q VLAN Support v1.8
IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
8021q: adding VLAN 0 to HW filter on device enp37s0
igb 0000:25:00.0 enp37s0: igb: enp37s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239